Wear Resistance of Nitrogen-Modified High-Alloy Steel under Friction Conditions without Lubricant
https://doi.org/10.32864/0202-4977-2024-45-6-473-485
Abstract
For a layered material “high-strength coating — base” with different values of the thickness of the strengthened layer, finite element modeling of the stress-strain state formed during friction was carried out. It is shown that with a decrease in the thickness of the coating, a significant increase in the level of shear stresses acting in the base during friction is recorded. The patterns of wear under dry friction conditions of high-chromium steels AISI 304 and AISI 420 modified with nitrogen ions, differing in the hardness of the base and the thickness of the nitrided layer, have been studied. It is concluded that the abnormally high wear rate of a thin nitrided layer in steel AISI 304 is associated with the accumulation of shear strains in the plastic austenitic base during friction, as well as with a high gradient of hardness values along the depth of the hardened layer in the steel and a phase → transformation in the base during frictional interaction. The influence of base hardness on the wear resistance of nitrided steel AISI 420 was studied. It has been estab-lished that an increase in the hardness of the AISI 420 steel base leads to a decrease in the wear rate of thin nitrided layers at the later stages of tribological tests, which is associated with a slowdown in the accumulation of shear strains in the solid steel base during friction.
About the Authors
V. A. KukarekoBelarus
Akademicheskaya str., 12, Minsk 220072
V. V. Mozharovsky
Belarus
Savieckaja Str., 104, Gomel 246028
A. V. Kushnerou
Belarus
Akademicheskaya str., 12, Minsk 220072
S. A. Marjin
Belarus
Savieckaja Str., 104, Gomel 246028
References
1. Alekhin V.P. Fizika prochnosti i plastichnosti pov-erkhnostnykh sloev materialov. — M.: Nauka. — 1983 (in Russian)
2. Bakli D. Poverkhnostnye yavleniya pri adgezii i friktsionnom vzaimodeistvii. — M.: Mashi-nostroenie. — 1986 (in Russian)
3. Marchenko, E.A. O prirode razrusheniya metallov pri trenii. — M.: Nauka. — 1979 (in Russian)
4. Suslov A.G. Inzheneriya poverkhnosti detalei. — M.: Mashinostroenie. — 2008 (in Russian)
5. Vityaz' P.A., Zhornik V.I. Metody inzhenerii pov-erkhnosti i nanotekhnologii dlya povysheniya resursa iznashivaemykh poverkhnostei // Vestsі Natsyyanal'nai akademіі navuk Belarusі. Seryya fіzіka-tekhnіchnykh navuk. — 2017, № 3, 30—46 (in Russian)
6. Makhutov N.A. Konstruktsionnaya prochnost', resurs i tekhnogennaya bezopasnost': V 2 ch. — Ch. 1: Kriterii prochnosti i resursa; Ch. 2: Obosno-vanie resursa i bezopasnosti. — Novosibirsk: Nauka. — 2005 (in Russian)
7. Budilov V.V., Mukhin V.S., Shekhtman S.R. Nan-otekhnologii obrabotki poverkhnosti detalei na os-nove vakuumnykh ionnoplazmennykh metodov. Fizicheskie osnovy i tekhnicheskie resheniya. — M.: Nauka. — 2008 (in Russian)
8. Kukareko V.A., Mozharovskii V.V., Kushne-rov A.V., Mar'in S.A. Zakonomernosti iznashiva-niya uprochnennoi ionami azota austenitnoi stali 12Kh18N10T // Problemy fiziki, matematiki i tekhniki. — 2020, № 4(45), 37—43 (in Russian)
9. Markov D.P., Kelli D. Adgezionno-initsiiruemye tipy katastroficheskogo iznashivaniya // Trenie i iznos. — 2002 (23), № 5, 483—493 (in Russian)
10. Dzhonson K. Mekhanika kontaktnogo vzai-modeistviya: per. s angl. — Moskva: Mir. — 1989 (in Russian)
11. Mozharovskii V.V., Rogacheva N.A. Issledovanie napryazhennogo sostoyaniya voloknistogo kompo-zitsionnogo materiala s odnorodnym pokrytiem pri kontakte s tsilindricheskim indentorom // Materialy, tekhnologii, instrumenty. — 2000 (5), № 2, 5—10 (in Russian)
12. Mozharovskii V.V., Kukareko V.A., Mar'in S.A., Kushnerov A.V. Chislennyi raschet i analiz naprya-zhennogo sostoyaniya v sloistom tele pri trenii s uchetom izmeneniya modulei uprugosti pokrytiya i osnovaniya // Problemy fiziki, matematiki i tekhniki. — 2024, № 1(58), 22—28 (in Russian)
13. Belyi A.V. Vysokointensivnaya nizkoenergetich-eskaya implantatsiya ionov azota // Fizicheskaya mezomekhanika, — 2002 (5), № 1, 95 (in Russian) obrabotki materialov». — Minsk: FTI NAN Bela-rusi. — 2022, 153—162 (in Russian)
14. Kushnerov A.V., Kukareko V.A., Belyi A.V. Za-konomernosti adgezionnogo iznashivaniya up-rochnennoi ionami azota khromistoi stali austenit-nogo klassa // Sbornik nauchnykh trudov «Sov-remennye metody i tekhnologii sozdaniya i obrabotki materialov». — Minsk: FTI NAN Bela-rusi. — 2022, 153—162 (in Russian)
15. Bokshtein B.S., Yaroslavtsev A.B. Diffuziya atomov i ionov v tverdykh telakh. — M.: MISIS. — 2005 (in Russian)
Review
For citations:
Kukareko V.A., Mozharovsky V.V., Kushnerou A.V., Marjin S.A. Wear Resistance of Nitrogen-Modified High-Alloy Steel under Friction Conditions without Lubricant. Title in english. 2024;45(6):473-485. (In Russ.) https://doi.org/10.32864/0202-4977-2024-45-6-473-485
JATS XML