Mechanism of Lubricating Action of Model Systems with Additives of Carbon Nanostructures under Hard Friction Conditions

The mechanism of the lubricating effect of two model lubricants based on medical vaseline with 0.5 wt. % additives of carbon nanostructures (CNS), namely graphene oxide (GO) and shungite nanocarbon (Sh), under hard friction conditions (friction machine 2070 SMT-1, “disc–roller” friction pair made of hardened steel ShKh15, load 2000 N) has been established. The friction surfaces were examined by confocal laser micros-copy and scanning electron microscopy. The elemental composition of the friction surfaces was determined with the help of energy-dispersive X-ray spectroscopy (EDX) and X-ray photoelectron spectroscopy (XPS). The contribution of the chemical component (formation of iron oxides) to the anti-wear process was analyzed. It was found that despite the difference in the spatial structure of the used CNSs, the processes occurring in the friction zone are chemically similar. It has been demonstrated that with the use of both model lubricants, protective oxide films consisting of iron oxides (FeO, Fe2O3, Fe3O4) are formed in the contact zone. The chemical composition of the oxide film and the quantitative ratio of the formed iron oxides are not signifi-cantly affected by the type of CNS additives used. The obtained results, together with the studies we per-formed earlier, demonstrate that the mechanical component, associated with the spatial organization of CNS additive, makes the decisive contribution to the anti-wear process under hard friction conditions.

1. Unal H. and Mimaroglu A. Friction and Wear Be-haviour of Unfilled Engineering Thermoplastics // Materials and Design. — 2003 (24), no. 3, 183—187. DOI: 10.1016/S0261-3069(03)00018-9

2. Hu J., Li D.Y., and Llewellyn R. Computational Investigation of Microstructural Effects on Abrasive Wear of Composite Materials // Wear. — 2005 (259), 6—17. DOI: 10.1016/J.WEAR.2005.02.017

3. Parfenov A.S., Berezina E.V., Shilov M.A., Smirno-va A.I., Usol’tseva N.V., Tkachev A.G., Bur-kov A.A., and Rozhkova N.N. Influence of Various Carbon Allotropes on Tribological and Rheological Characteristics of Model Lubricating Systems // Jour-nal of Friction and Wear. — 2021 (42), no. 3, 217—224. DOI: 10.32864/0202-4977-2021-42-3-338-349

4. Fink M. Wear Oxidation, a New Component of Wear // Trans. Am. Soc. Steel Treating. — 1930 (18), 1026—1034. DOI: 10.3389/fmats.2021.787729

5. Shilov M.A., Smirnova A.I., Zhukova L.N. et al. The Influence of the Spatial Organization of Car-bon Nanostructures on Antiwear Characteristics of Model Lubricating Systems under a Hard Friction Mode // Journal of Friction and Wear. — 2023 (44), no. 3, 144—149. DOI: 10.3103/S1068366623030091

6. Nagare P. and Kudal H. A Taguchi Approach on Influence of Graphite as an Anti-Wear Additive on the Performance of Lithium Grease // Proc. Manuf. — 2018 (20), 487—492. DOI: 10.1016/j.promfg.2018.02.072

7. Zhang Y., Li P., Li, Liu X., Wan H., Chen L., Li H., and Jin Zh. Tribological Properties of MoS2 Coating for Ultra-Long Wear-Life and Low Coeffi-cient of Friction Combined with Additive g-C3N4 in Air // Friction. — 2021 (9), no. 4, 789—801. DOI: 10.1007/s40544-020-0374-3

8. Hou K.M., Han M.M., Liu X.H., et al. In situ For-mation of Spherical MoS2 Nanoparticles for Ultra-low Friction // Nanoscale. — 2018 (10), no. 42, 19979—19986. DOI: 10.1039/C8NR06503A

9. Johns E.I., Padgurskas J., Zunda A., Kupcin-skas A., and Kavaliova I.N. Study of Tribologi-cal Properties of Tallow Modified by Graphene and Expanded Graphite // Journal of Friction and Wear. — 2018 (39), no. 4, 341—344. DOI: 10.3103/S1068366618040049

10. Choa M.H., Jeong J., Kima S.J., and Jang H. Tribological Properties of Solid Lubricants (Graph-ite, Sb2S3, MoS2) for Automotive Brake Friction Materials // Wear. — 2006 (260), 855—860. DOI: 10.1016/J.WEAR.2005.04.003

11. Fan X., Xia Y., Wang L., and Li W. Multilayer Graphene as a Lubricating Additive in Bentone Grease // Tribol. Lett. — 2014 (55), 455—464. DOI: 10.1007/s11249-014-0369-1

12. Scardi P., Leoni M., Straffelini G., and De Giudici G. Microstructure of Cu‒Be Alloy Triboxidative Wear Debris // Acta Mater. — 2007 (55), no. 7, 2531—2538. DOI: 10.1016/j.actamat.2006.11.046

13. Mischler S. Triboelectrochemical Techniques and In-terpretation Methods in Tribocorrosion: a Comparative Evaluation // Tribology International. — 2008 (41), no. 7, 573—58. DOI: 10.1016/j.triboint.2007.11.003

14. Song H., Wang Zh., and Yang J. Tribological Prop-erties of Graphene Oxide and Carbon Spheres as Lu-bricating Additives // Appl. Phys. A. — 2016 (122), ar-ticle no. 933, 9 p. DOI: 10.1007/s00339-016-0469-x

15. Ali I., Basheer A.A., Kucherova A., Memetov N., Pasko T., Ovchinnikov K., Pershin V., Kuzne-tsov D., Galunin E., Grachev V., and Tkachev A. Advances in Carbon Nanomaterials as Lubricants Modifiers // Journal of Molecular Liquids. — 2019 (279), 251—266. DOI: 10.1016/j.molliq.2019.01.113

16. Yunusov F.A., Brteki A.D., Vasilyeva E.S., and Tolochko O.V. The Influence of Nano Additives on Tribological Properties of Lubricant Oil // Materials Today: Proceedings. — 2019 (30), DOI: 10.1016/j.matpr.2020.01.447