Evaluation of the Wear Resistance of a Radial Bearing with a Non-Standard Bearing Surface, Taking into Account the Compressibility and Viscosity of the Lubricant

The research includes the development and analysis of a mathematical model of a truly viscous lubricant in a modified sliding bearing design with a composite fluoroplastic coating on the surface of the shaft and a groove, which helps to improve the distribution of lubricant and increase the durability of the system. Based on the equation of motion, the liquid lubricant under study, the continuity equation and the equation of state, new mathematical models have been obtained that additionally take into account such a parameter as com-pressibility. The novelty of the work lies in the development of a methodology for engineering calculations of the design of a radial sliding bearing with a polymer coating, taking into account the presence of a groove, as well as the dependence of viscosity on pressure and compressibility of the lubricant, allowing to determine the value of the main tribotechnical parameters. The results of the study provided a reduction in errors in bearing capacity by 11—13 %, and in coefficient of friction by 9—12 % of the modified bearing in compar-ison with traditional designs. As a result, it was possible to achieve an increase in the service life of radial bearings, which is of great importance for their industrial application.

1. Pavlycheva E.A. Razrabotka polimernoj kompozi-cii dlya polucheniya zashchitnogo pokrytiya na me-tallicheskih poverhnostyah // Mezhdunarodnyj zhur-nal prikladnyh i fundamental'nyh issledovanij. — 2022, no. 2, 33—36. DOI: 10.17513/mjpfi.13355 (in Russian)

2. Grakovich P.N., Shelestova V.A., Shum-skaya V.Yu., Shil'ko I.S., Gucev D.M., Bashla-kova A.L., Celuev M.Yu. Vliyanie tipa uglevo-loknistogo napolnitelya na fiziko-mekhanicheskie i tribotekhnicheskie svojstva ftoroplastovyh kompo-zitov // Journal of Friction and Wear. — 2019 (40), no. 1, 18—24

3. Titov N.V., Kuznecov I.S., Logachev V.N., Prud-nikov M.I., Kovaleva I.N. Effektivnost' prime-neniya antifrikcionnyh tverdosmazochnyh pokrytij dlya par treniya «metall-polimer» // Journal of Fric-tion and Wear. — 2024 (45), no. 2, 110—117. DOI 10.32864/0202-4977-2024-45-2-110-117

4. Robertson B.P. and Calabrese M.A. Evaporation-controlled Dripping-Onto-Substrate (DoS) Exten-sional Rheology of Viscoelastic Polymer Solu-tions // Scientific Reports. — 2022 (12), no. 1, 4697. DOI: 10.1038/s41598-022-08448-x

5. Saha S. and Adachi Y. Shielding Behavior of Elec-trokinetic Properties of Polystyrene Latex Particle by the Adsorption of Neutral Poly(ethylene oxide) // Journal of Colloid and Interface Science. — 2022, no. 626, 930—938. DOI: 10.1016/j.jcis.2022.06.154

6. Egghe T., Ghobeira R., Morent R. et al. Compar-ative Study of the Aging Behavior of Plasma Acti-vated Hexamethyldisiloxane-Based Plasma Poly-mers and Silicone Elastomer Thin Films // Progress in Organic Coatings. — 2022, no. 172, 107091. DOI: 10.1016/j.porgcoat.2022.107091

7. Chernec M., Shil'ko S., Kornienko A., and Pashe-chko M. Triboanaliz antifrikcionnyh materialov na osnove poliamidov dlya metallopolimernyh pod-shipnikov skol'zheniya // Journal of Friction and Wear. — 2023 (44), no. 2, 103—113. DOI 10.32864/0202-4977-2023-44-2-103-113

8. Nithin S., Rajagopal K., and Veeraragavan A. State-of-the Art Summary of Geosynthetic Inter-layer Systems for Retarding the Reflective Crack-ing // Indian Geotechnical Journal. — 2015 (45), no. 4, 472—487. DOI: 1 0.1007/s40098-015-0161-7

9. Zhang F. and Wei X. Study of Ionic/Nonionic Pol-yurethane Dispersions with High Solid Content and Low Viscosity Using a Complex Hydrophilic Chain-Extending Agent // Journal of Coatings Technology and Research. — 2018 (15), no. 1, 141—148. DOI: 10.1007/s11998-017-9965-y

10. Thirumurugan V. and Kumar M.R. Design of an Instrument to Determine the Acoustic Characteristics of Non Wovens Made from Recycled Polyester, Jute and Flax // Fibers and Polymers. — 2020 (21), no. 12, 3009—3015. DOI: 10.1007/s12221-020-0096-1

11. Mestry S.U., Khuntia S.P., and Mhaske S.T. Cor-rection to: Development of Waterborne Polyure-thane Dispersions (WPUDs) from Novel Cardanol-Based Reactive Dispersing Agent // Polymer Bulle-tin. — 2021 (78), no. 12, 1—1. DOI: 10.1007/s00289-020-03504-w

12. Lysova M.A., Gruzitseva N.A., and Gusev B.N. Establishment of Quality Indicators for Nonwoven Geosynthetic Fabrics According to Their Opera-tional Functions // Russian Journal of General Chemistry. — 2021 (91), no. 6. 1213—1217. DOI: 10.1134/S1070363221060359

13. Nega B.F., Pierce R.S., Yi X., and Liu X. Charac-terization of Mechanical and Damping Properties of Carbon. Jute Fibre Hybrid SMC Composites // Ap-plied Composite Materials. — 2022 (3), no. 29(10), 1637—1651. DOI: 10.1007/s10443-022-10034-3

14. Kirishchieva V.I., Mukutadze M.A. Povyshenie iznosostojkosti radial'nogo podshipnika s nekru-govym opornym profilem i ftoroplastsoderzhash-chim kompozicionnym polimernym pokrytiem // Transportnoe mashinostroenie. — 2022 (11), no. 11, 10—17. DOI: 10.30987/2782-5957-2022-11-10-17 (in Russian)

15. Khasyanova D.U., Mukutadze M.A., Muku-tadze A.M., and Zadorozhnaya N.S. Mathematical Model for a Lubricant in a Sliding Bearing with a Fusible Coating in Terms of Viscosity Depending on Pressure under an Incomplete Filling of a Working Gap // Journal of Machinery Manufacture and Reli-ability. — 2021, no. 50, 405—411. DOI: 10.3103/S1052618821050083