Tribotechnical Coatings for Space Application

The need to use Solid Lubricating Coating (SLC) arose already with the launch of the first space satellites, in which cold welding of articulated joints took place. SLC have the following main advantages [1, 2, 4]: low evaporation in a vacuum, low friction coefficient, and performance in zero gravity. They can be used in outer space conditions over a wider temperature range than frost-resistant plastic lubricants. The selection of the most suitable SLC [3-6] requires a thorough study of their tribotechnical characteristics depending on the design of friction units, frictional interaction parameters, and environmental characteristics. SLC are capable of operating in a wide range of temperatures in air, vacuum, and gas environments; they have a radiation resistance of 10⁶—10¹⁰ rad depending on the binder; they are capable of withstanding high contact loads and are insensitive to zero gravity. The most widespread SLC are in the form of suspensions of solid lubricant with a binder, applied by a spray gun with subsequent curing by heat treatment. A wide range of coatings has been developed: VNIINP-213, VNIINP-512, VNIINP-513, APF-5, EONIT-3 and Dimolits.

We conducted tribological testing of the above coatings using various friction pair configurations, in air and vacuum, at various temperatures, and across a wide range of loads and sliding speeds.

These data are important for selecting coatings for friction components being developed for spacecraft.

1. Bronovets М.А. Tribological Coatings for Open Space // Journal of Friction and Wear. — 2023 (44), no. 6, 544—550

2. Yang I.C. and De Groh K.K. Materials Issues in the Space Environment // Mrs Bull. — 2010 (35), 12—16

3. Bronovets M.A. Open space: Tribology problems and test tasks // Sb. statei mezhdunarod-noi nauchnoi konferentsii «Mekhanika i tribologiya transportnykh sistem (MekhTriboTrans−2021)» (Coll. of Sci. Papers of Int. Sci. Conf. «Mechanics and Tribology of Transport Systems (MekhTriboTrans−2021))». — Rostov-on-Don: Rostovskii Gos. Univ. Putei Soobshcheniya. — 2021, 35—40. https://doi.org/10.46973/978-5-907295-520_2021_35

4. Wang H., Xu B., and Liu J. Solid Lubrication Materials. — Springer, Berlin, Heidelberg. — 2012. https://doi.org/10.1007/978-3-642-23102-5_1

5. Vazirisereshk M.R., Martini A., Strubbe D.A., and Baykara M.Z. Solid Lubrication with MoS2: a Review // Lubricants. — 2019 (7), 7. https://doi.org/10.3390/LUBRICANTS7070057

6. Sun X. Solid Lubricants for Space Mechanisms, Encyclopedia of Tribology. — Boston, MA: Springer. — 2013, 3165–72. https://doi.org/10.1007/978-0-387-92897-5_1230

7. Lince J.R. Doped MoS2 Coatings and Their Tribology, Encyclopedia of Tribology. — Boston, MA: Springer. — 2013. https://doi.org/10.1007/978-0-387-92897-5_1175

8. Georgakilas V., Perman J.A., Tucek J., and Zboril R. Broad Family of Carbon Nanoallotropes: Classification, Chemistry, and Applications of Fullerenes, Carbon Dots, Nanotubes, Graphene, Nanodiamonds, and Combined Superstructures // Chem. Rev. — 2015 (115), no. 11, 4744—4822. https://doi.org/10.1021/cr500304f9