Discrete-Element Model of Wear of Structural Elements of a Centrifugal Decanter for Improved Cleaning of Drilling Fluids

It is shown that during drilling, cleaning of drilling solution using centrifugal decanters minimizes the presence of abrasive particles in the system and reduces mechanical wear of structural elements and pumping units. The results of a comparative analysis of the resource of the initial nozzle design and three proposed modifications, differing in surface geometry and orientation relative to the direction of rotation of the drum, are presented. A comprehensive assessment of the effect of design changes on the particle escape velocity and, as a result, on the wear rate was carried out using an analytical model for calculating the amount of wear during particle impact.

A discrete-element model of the processes accompanying the operation of a centrifugal decanter (movement of drilling solution along the centrifuge screw) has been developed. The time before the formation of critical wear (destruction) of the nozzle surfaces is calculated. The influence of geometric and design param-eters of centrifugal decanter nozzles on the efficiency of the drilling solution cleaning process has been studied. It is shown that reducing the height and diameter of the nozzles to 34 mm and 37 mm, respectively, increased the surface wear time by 1.5 times.

An analytical evaluation of the resource of cylindrical nozzle surfaces for various design options has been performed. A significant increase in service life is achieved by changing the inclination of the cylindrical surfaces of the nozzles against the direction of rotation of the drum. The wear time of the nozzle surface increases 12.5 times.

1. Menesklou P., Sinn T., Nirschl H., and Gleiss M. Scale-Up of Decanter Centrifuges for the Particle Separation and Mechanical Dewatering in the Minerals Processing Industry by Means of a Numerical Process Model // Minerals. — 2021 (11), no. 2, 229

2. Bashkircev V.I., Yudickij L.A. Nauchnye predstavleniya ob adgezii // Servis v Rossii i za rubezhom. — 2012, № 3(30), 216—223 (in Russian)

3. Yudakov V.S., Dekanoidze E.M., Muhtarov M.Sh., Tilichkan A.A. Issledovanie vliyaniya zenitnogo ugla naklonno-napravlennoj skvazhiny na napryazhenno-deformirovannoe sostoyanie okoloskvazhinnogo prostranstva // Mezhdunarodnyj nauchno-issledovatel'skij zhurnal. — 2020, № 8-1, 157—162 (in Russian)

4. Yi-jing Liu, Li-Na Zhu, Mei-gui Feng, et al. Study on the Erosion Wear Characteristics and Structural Optimization of Key Components of Drilling Fluid Centrifuge // Journal of Failure Analysis and Prevention. — 2025 (25), no. 18, 468—486

5. Kewei Li, Faqi Zhou, Shuangcheng Fu, et al. Study on the Separation Performance of a Decanter Centrifuge Used for Dewatering Coal Water Slurry // Chemical Engineering Research and Design. — 2023 (195), 711—720

6. Hongbin Liu, Pingying Li, Huina Xiao, et al. The fluid–Solid Coupling Analysis of Screw Conveyor in Drilling Fluid Centrifuge Based on ANSYS // Petroleum. — 2015 (1), no. 3, 251—256

7. Yudakov V.S., Dekanoidze E.M. Sozdanie algoritma dlya vypolneniya raschetov ustojchivosti stenok naklonno-napravlennoj skvazhiny s pomoshch'yu MATCAD // Aktual'nye nauchnye issledovaniya v sovremennom mire. — 2020, № 7-2, 147—152 (in Russian)

8. Dekanoidze E.M. Razrabotka algoritma i napisanie programm dlya vypolneniya raschetov s pomoshch'yu MATLAB // Aktual'nye nauchnye issledovaniya v sovremennom mire. — 2020, № 7.1(63), 50—53 (in Russian)

9. Changzhi Bai, Hangil Park, Liguang Wang. Modelling Solid-Liquid Separation And Particle Size Classification In Decanter Centrifuges // Separation and Purification Technology. — 2021 (263), no. 15, 118408

10. Mingjun Zhu, Yunfei Xu, Dapeng Hu. et al. Design and Computational Fluid Dynamics Analysis of a Three-Phase Decanter Centrifuge for Oil-Water-Solid Separation // Chemical Engineering and Technology. — 2020 (43), no. 5, 1005—1015

11. Marco Gleiss, Simon Hammerich, Michael Kespe et al. Application of the Dynamic Flow Sheet Simulation Concept to the Solid-Liquid Separation: Separation of Stabilized Slurries in Continuous Centrifuges // Chemical Engineering Science. — 2017 (163), no. 18, 167—178

12. Alessandro Leone, Roberto Romaniello, Ric-cardo Zagaria et al. Mathematical Modelling of the Performance Parameters of a New Decanter Centrifuge Generation // Journal of Food Engineering. — 2015 (166), 10—20

13. Nepomnyashchij E.F. Trenie i iznos pod vozdejstviem strui tverdyh sfericheskih chastic // Kontaktnoe vzaimodejstvie tverdyh tel i raschet sil treniya i iznosa. — M.: Nauka. — 1971, 190—200 (in Russian)

14. Tamarkin M.A., Tihonov A.A. Metod rascheta s"ema metalla pri gidroabrazivnoj obrabotke // Vestnik DGTU. — 2011 (11), № 3(54), 327—332 (in Russian)