Tribology Machines for Tribology and Wear Testing of Drive Roller Chains

Modern methods and equipment for testing and studying chain transmissions including specialized stands for bicycle transmissions are considered. It analyzes their advantages, limitations, and future development trends, such as the use of next-generation sensors and the automation of testing processes. Special attention is given to the standardization of testing and the adaptation of industrial methods to the specific needs of the bicycle industry and in scientific research. It has been established that in most cases, the industry uses standard calculation methods and universal testing machines, which explains the limited use of such testing stands and friction machines. Despite the widespread use of bicycles there is very little literature available on the wear and efficiency of bicycle chains.

Thus, this article can serve as a useful resource for professionals involved in the design, testing, and analysis of the material properties of drive roller chains under friction and wear conditions.

1. Khamzayev A.A., Nishonov Kh.Kh., Abdullayev Z.D. Sovremennyye tsepnyye peredachi i ikh ispolzovaniye v selskokhozyaystvennykh mashinakh // Mekhanika i tekhnologiya. — 2023, № 1(4) Spetsvypusk, 20—25 (in Russian)

2. Liew Y.W., Matthews O., Dao D.V., and Li H. Power Transmission Mechanism and Tribological Performance of Modern Bicycle Drivetrains – A Review // Machines. — 2025 (13), 66. https://doi.org/10.3390/machines13010066

3. Spicer J.B., Richardson C.J.K., Ehrlich M.J., Bernstein J.R., Fukuda M., and Terada M. Effects of Frictional Loss on Bicycle Chain Drive Efficiency // Journal of Mechanical Design. — 2001 (12), no. 3(4), 598—605. https://doi.org/10.1115/1.1412848

4. Osikov A.A. Metodika eksperimentalnykh issledovaniy tsepnoy peredachi s otkrytym sharnirom // Agroinzheneriya. — 2012, № 1(52), 62—63 (in Russian)

5. Strizhkov I.G., Khorkov E.E. Modelirovaniye elektrooborudovaniya stenda ispytaniya rolikovykh tsepey // Politematicheskiy setevoy elektronnyy nauchnyy zhurnal Kubanskogo gosudarstvennogo agrarnogo universiteta. — 2014, № 96, 761—774 (in Russian)

6. Usov A.S. Povysheniye dolgovechnosti privodnykh tsepey zernouborochnykh kombaynov // dis. … kand. tekhn. nauk. — Zernograd. — 2017 (in Russian)

7. Meffert Dominik, Oehler Manuel, and Sauer Bernd. Precise Friction Measurement in Drive Chains Using a Chain Joint Tribometer // Tribology Online. — 2021 (16), no. 3, 151—158, Released on J-STAGE July 31, 2021, Online ISSN 1881-2198, https://doi.org/10.2474/trol.16.151

8. Ryoichi Saito, Nao-Aki Noda, and Yoshikazu Sano., Newly Developed Wear Testing Machine Having Sufficient Reproducibility Useful for Investigating Roller Chains // ISIJ International. — 2020 (60), no. 10, 2255—2265. Released on J-STAGE October 20, 2020, Online ISSN 1347-5460, Print ISSN 0915-1559, https://doi.org/10.2355/isijinter-national.ISIJINT-2020-086

9. Becker A., Meffert D., and Sauer B. Friction and Wear Investigations on Single Chain Joints // Forsch Ingenieurwes. — 2019, no. 83, 53—63. https://doi.org/10.1007/s10010-019-00297-x

10. What’s the Important Chain Testing?: [Electronic resource]. URL: https://www.universal-chain.net/blogs/roller-chain/chain-testing/

11. What are Important Tests for Chains?: [Electronic resource]. URL: https://blog.mcc-chains.com/en/2022/12/22/important-tests-for-chain

12. U.S. Tsubaki, Inc, The Complete Guide to Chain. — 1997. https://www.ustsubaki.com/wp-content/uploads/the-complete-guide-1.pdf

13. Arun A.P., Giriraj B., and Rahaman A.F. Gear Test Rig - A Review // International Journal of Mechanical. — 2014, 16—26

14. Herzog C. and Drummer D. Test Rig for the in situ Measurement of the Elastic Tooth Deflection of Plastic Gears // Polymers. — 2023 (15), no. 7, 1732. https://doi.org/10.3390/polym15071732

15. Åkerblom M. Gear Test Rig for Noise and Vibration Testing of Cylindrical Gears. — 1999, 1—7

16. Westphal C., Brimmers J., and Brecher C. Influence of Axis Misalignments in Stepped Planetary Gear Stages on the Excitation Behavior – Test Rig Development and Simulative Analysis // Forsch Ingenieurwes. — 2023, no. 87, 1103—1116. https://doi.org/10.1007/s10010-023-00709-z

17. Stend dlya ispytaniya zubchatykh peredach: № 4336970: Avtorskoye svidetelstvo № 1516826 A1 SSSR. MPK G01M 13/02: opubl. 23.10.1989 / L.E. Pelevin. Yu.A. Royko. A.Z. Fridman. E. B. Borodyanskiy (in Russian)

18. Stend dlya ispytaniya tsepnykh peredach: № 4032056: Avtorskoye svidetelstvo № 1350522 A1 SSSR. MPK G01M 13/02: opubl. 11.07.1987 / E.Z. Zverovshchikov. B.V. Romanovskiy. A.V. Belous (in Russian)

19. Stend s zamknutym elektricheskim konturom dlya ispytaniya zubchatykh peredach: № 1335636/25-28: Avtorskoye svidetelstvo № 291122 A1 SSSR. MPK G01M 13/02: opubl. 06.01.1971 / A.P. Varaksa (in Russian)

20. Stend dlya prirabotki i ispytaniy zubchatykh peredach: № 4485285: Avtorskoye svidetelstvo № 1567914 A1 SSSR. MPK G01M 13/02: opubl. 30.05.1990 / A.I. Belyayev, G.I. Mikhaylov, A.I. Siritsyn (in Russian)

21. Stend dlya ispytaniya zubchatykh peredach: № 4418519: Avtorskoye svidetelstvo № 1518694 A1 SSSR. MPK G01M 13/02: opubl. 30.10.1989 / L.E. Pelevin, Yu.A. Royko, I.A. Klimko [i dr.] (in Russian)

22. Stend dlya ispytaniya zubchatykh peredach: № 4934121: Avtorskoye svidetelstvo № 1820271 A1 SSSR. MPK G01M 13/02: opubl. 07.06.1993 / P.M. Biryukov, M.P. Biryukov, A.V. Korotkevich, K.T. Belyak (in Russian)

23. Pletnev L.A., Al-Nadzhar M., Breki A.D. Mod-elirovaniye deformatsii zvenyev bezvtulochnoy rolikovoy tsepi metodom konechnykh elementov // Intellektualnaya tribologiya v mashinostroyenii: BALT TRIBO 2024: Materialy 1-y Mezhdunarodnoy nauchno-prakticheskoy konferentsii. Sankt - Peterburg. Rossiya. 21–22 iyunya 2024 goda. — Sankt-Peterburg: POLITEKh-PRESS. — 2024, 258—263. DOI 10.18720/SPBPU/2/id24-255 (in Russian)

24. Ross J. and Meyer J. Simulating the Dynamic Behaviour of Chain Drive Systems by Advanced CAE Programs // SAE Technical Paper. — 1996, 960298. https://doi.org/10.4271/960298 (in Russian)

25. Gorozhankin S.A., Savenkov N.V., Skripkar V.G. Primeneniya asinkhronnoy elektricheskoy mashiny v kachestve tormoznogo ustroystva pri opredelenii pokazateley avtomobilnogo DVS na neustanovivshikhsya rezhimakh raboty // Avtotransportnoye predpriyatiye. — 2016, № 9, 49—62 (in Russian)

26. Byakov K.E., Ivanenkov V.V., Kholodenko V.B., Chudakov O.I. Obzor konstruktsiy sovremennykh dinamometricheskikh stendov dlya ispytaniy kolesnykh transportnykh sredstv // Transportnyye sistemy. — 2021, № 4(22), 4—15. DOI: 10.46960/62045_2021_4_4 (in Russian)

27. Stend dlya ispytaniya tsepnykh peredach: № 2014134006/28: Patent na poleznuyu model № 147242 U1 Rossiyskaya Federatsiya. MPK G01M 13/02: opubl. 27.10.2014 / S.B. Berezhnoy, A.V. Puntus, N.V. Mevsha [i dr.] (in Russian)

28. Egorov A.V., Kozlov K.E. Inertsionnyy metod otsenki vliyaniya kachestva smazochnykh materialov na energeticheskuyu effektivnost tsepnykh peredach // Mashinostroyeniye i kompyuternyye tekhnologii. — 2013, № 06, 1—22 (in Russian)

29. Dowd Teal and Mansson Jan-Anders. Novel Model for Bicycle Drivetrain Efficiency. — 2024, 1—16. https://doi.org/10.31224/3901

30. CeramicSpeed. Chain Efficiency Testing: [Electronic resource]. URL: https://ceramicspe-ed.com/en-eu/pages/chain-efficiency-testing

31. Josh Patterson. CeramicSpeed Acquires Friction Facts: [Electronic resource]. URL: https://www.bikera-dar.com/news/ceramicspeed-acquires-friction-facts

32. Full load test method: [Electronic resource] // Friction Facts. URL: https://web.archi-ve.org/web/20180421124005/http://www.friction-facts.com/equipment/chain-full-load

33. Full Tention Test Method: [Electronic resource] // Friction Facts. URL: https://web.archi-ve.org/web/20180421123810/http://www.friction-facts.com/equipment/full-tension-test-method

34. ZeroFrictionCycling: [Electronic resource]. URL: https://zerofrictioncycling.com.au/

35. Chain Longevity Testing – Full Test Brief: [Electronic resource] // ZeroFrictionCycling. URL: https://zerofric-tioncycling.com.au/wp-content/uploads/2018/04/Chain-Longevity-Testing-Full-test-brief.pdf

36. Dotsenko A.I., Buyanovskiy I.A. Osnovy tribotekhniki. Uchebnik. — M.: Infra-M. — 2016 (in Russian)

37. Kombalov B.C. Metody i sredstva ispytaniy na treniye i iznos konstruktsionnykh i smazochnykh materialov: spravochnik / pod red. K.V. Frolova. E.A. Marchenko. — M.: Mashinostroyeniye. — 2008 (in Russian)

38. Tabascio A., Tiznado-Aitken I., Harris D., and Farber S. Assessing the Potential of Cycling Growth in Toronto, Canada // Int. J. Sustain. Transp. — 2023, no. 17, 1370—1383

39. Oliveira F., Nery D., Costa D.G., and Silva I. A Survey of Technologies and Recent Developments for Sustainable Smart Cycling. Sustainability. — 2021, no. 13, 3422

40. Chen W., Carstensen T.A., Wang R., Derrible S., Rueda D.R., Nieuwenhuijsen M.J., and Liu G. Historical Patterns and Sustainability Implications of Worldwide Bicycle Ownership and Use // Commun. Earth Environ. — 2022, no. 3, 171

41. Rérat P. The Rise of the e-Bike: Towards an Extension of the Practice of Cycling? // Mobilities. — 2021, no. 16, 423—439

42. Teixeira J.F., Silva C., and Moura F. Empirical Evidence on the Impacts of Bikesharing: A Literature Review // Transp. Rev. — 2021, no. 41, 329—351

43. Popan C. Introduction Tips of the cycling iceberg. In Bicycle Utopias: Imagining Fast and Slow Cycling Futures. — Abingdon, UK: Taylor & Francis Group — 2018

44. Malizia F. and Blocken B. Cyclist Aerodynamics Through Time: Better, Faster, Stronger // J. Wind. Eng. Ind. Aerodyn. — 2021, no. 214, 104673

45. Holmberg K. and Erdemir A. Influence of Tribology on Global Energy Consumption, Costs and Emissions // Friction. — 2017, no. 5, 263—284

46. Underwood L. and Jermy M. Determining Optimal Pacing Strategy for the Track Cycling Individual Pursuit Event with a Fixed Energy Mathematical Model // Sports Eng. — 2014, no. 17, 183—196

47. Pickering C. and Byrne J. The Benefits of Publishing Systematic Quantitative Literature Reviews for PhD Candidates and Other Early-Career Researchers // High. Educ. Res. Dev. — 2014, no. 33, 534—548

48. Lovejoy K. and Handy S. Developments in Bicycle Equipment and its Role in Promoting Cycling as a Travel Mode // In City Cycling. — Cambridge, MA, USA: MIT Press. — 2012, 75—104

49. Lin T.Y., Tseng C.H., and Fong Z.H. An Experimental Approach Characterizing Rear Bicycle Derailleur Systems Part II: The Stability Region and its Applications // Int. J. Veh. Des. — 1998, no. 19, 371—384

50. Hadland T. and Lessing H. Bicycle Design: An Illustrated History. — Cambridge, MA, USA: The MIT Press. — 2014